Venturi Injector and Mixing Pump
The Venturi Injector is used with an ozone generator for water treatment. It is made of anti-ozone PVDF material and is connected to your existing filtration system where it injects ozone into a vacuum to mix into the water flow.
Ozone mixing device mixing pump and venturi for water treatment
Venturi tube for water treatment| Venturi | ||||||
| Marks | Model | Quantity (PC) | Size (mm) | |||
| 1 | A12057 | 1 | 57 | |||
| 2 | A25100 | 1 | 100 | |||
| 3 | A32235 | 1 | 235 | |||
| 4 | A25152 | 1 | 152 | |||
| 5 | A48275 | 1 | 275 | |||
| 6 | A58295 | 1 | 295 | |||
| Specifications | ||||||
| Model: Material: PVD Water flow rate: 0.05-0.25 T/Hr Specifications: 1. Inlet and outlet diameter 1/5" external screw thread 2. Valve bonnet of gas inlet is 1/8" 3. Flexible hose is 1/4" 4. Length: 57 mm |
Model :
Material: PVDF Water flow rate: 0.1-1 T/Hr Specifications: 1. Inlet and outlet diameter 1/2" external screw thread 2. Valve bonnet of gas inlet is 1/4" 3. Flexible hose is 1/4" 4. Length: 100 mm |
Model:
Material: PVDF Water flow rate: 3-10 T/Hr Specifications: 1. Inlet and outlet diameter 1" external screw thread. 2. Valve bonnet of gas inlet is 1/2" 3. Flexible hose is 3/8" 4. Length: 230 mm |
||||
| Model : Material: PVDF Water flow rate: 1-3 T/Hr Specifications: 1. Inlet and outlet diameter 3/4 " external screw thread 2. Valve bonnet of gas inlet is 1/4" 3. Flexible hose is 1/4" 4. Length: 152 mm |
Model: Material: PVDF Water flow rate: 10-25 T/Hr Specifications: 1. Inlet and outlet diameter 1.5" screw thread 2. Valve bonnet of gas inlet is 1/2" 3. Flexible hose is 1/2" 4. Length: 275mm |
Model :
Material: PVDF Water flow rate: 25-50T/Hr Specifications: 1. Inlet and outlet diameter 2" screw thread 2. Valve bonnet of gas inlet is 1.25" 3. flexible hose is 1/2" 4. Length: 295mm |
||||
The mixing pump brings in ozone to mix with water and has an ozone dissolution ratio of 80-100%, depending on water temperature, gas concentration, and pH concentration. This NT system does not use a compressor, pressure dissolve tank, ejector or static mixer, making it small and compact. With conventional centrifugal pumps, this pump sucks in liquid and air, mixing and transporting them. Diameter for micro bubbles: 20-30µ
Working conditions:
pH: 3-9
Highest environment temperature: 400C
Liquid temperature:-150C--1200C
| Item | ||||||
| Head of delivery | 40M | 50M | ||||
| Flow rate | 1T/Hr | 2T/Hr | 6T/Hr | 12T/Hr | ||
| Water input size | 0.75" | 1" | 1.5" | 2" | ||
| Water output size | 0.5" | 0.75" | 1.2" | 1.5" | ||
| Power | 0.55Kw | 1.1Kw | 3Kw | 5.5Kw | ||
| Voltage | 380V | 220V | 380V | 220V | 380V | 380V |
| Speed | 2900r/min | |||||
| Size of tank | Φ 200 × 320mm (3mm thickness) | Φ 273 × 720mm (3mm thickness) |
||||
